Quickcard Integration

Follow the instructions below for your Quickcard integration. 

Please Note: Perform the following actions directly on the terminal before beginning the Quickcard integration process.  Do not skip this process. 

Powering on and connecting your terminal to WiFi:

1. Take your terminal out of the box and connect it to power.
2. Locate and press the power button on the left side of the terminal.
3. Once your terminal is at the home screen, select “Settings” (Password: 1234)
4. Select “WLAN”
5. Locate and select your WiFi (no 5 GHz, 2.4 GHz only)
6. Enter you WiFi password and select “Connect”(case sensitive)
7. Your terminal should now be connected to the WiFi.

Settle Batch - Directions below are for existing customers.  Brand new customers can skip this step. 

• Start on the Homescreen of the Aura app.
• Select the 3 lines at the bottom of the screen.
• Select Settlement
• Select Settle Daily Batch
• Password: 1234 - Press OK
• If the screen displays Batch Settled, you have successfully settled the batch.

Full Download:

• Start on the Homescreen of the Aura app.
• Select the 3 lines at the bottom of the screen.
• Select Utility. Password: 1234 - Press OK

For existing customers continue to follow the instructions below:

• Select Software Download
• Select Connect
• Select Network
• Select Full
• TPN Number will display, press OK 
• Apply Updates? Press Yes

Integration Process

Enable the "Integrated Credit" Payment Type by navigating to Configurations -> Config Page -> Point of Sale -> Payment Types

Enable the "Integrated Credit" toggle, enter the desired "Convenience fee" (what you charge your customers to use credit, typically $5) then hit save.

Each terminal has a unique Serial Number (SN/TPN) and Integration Keys (RegisterId & AuthKey). The Integration Keys are what you will enter into Treez, they associate each terminal with a specific register/POS.

The Integration Keys will be sent to you via email and will look similar to this: 

Example Integration Keys ONLY! These are not the Integration Keys you will actually use. 

SN: WP31901Q4320383

TPN: 19014320383

RegisterId: 124370103

SN: WP31901Q4320383

TPN: 19014320383

RegisterId: 124370104

SN: WP31901Q4320383

TPN: 19014320383

RegisterId: 124370105

Find the terminal's Serial Number. You can do this by opening the back of the terminal where the receipt paper goes, and inside there should be a sticker with a serial number that starts with "WP". Each WP number will have an associated RegisterID & AuthKey. The RegisterID will be unique for each terminal, the AuthKey will be the same for every device.

Enter the "Integration Keys" from each terminal into its associated Register/ POS. You will repeat this process for each POS location.

Navigate to Configurations -> Config Page -> Hardware -> "POS_" -> Integrated Credit

Enable the "Integrated Credit" toggle and enter the Register ID & Auth Code for the terminal that you are setting up at that Register/POS then click Save.

Click Test, and if it comes back "Success Device is Online" you are all set.