The SellTreez Retail iPad app brings you the SellTreez point of sale on any Apple tablet. It has been designed to seamlessly provide you the same experience as the desktop version you know and love, with the flexibility and portability of an iPad.

Skip to:

___________________________________________

The SellTreez Retail app is currently only compatible with the hardware listed below. We are currently working to expand the available options and will be adding new supported printers and scanners soon.

Only iPads are supported; at this time iPhones aren't compatible with the SellTreez Retail App due to screen size limitations.

___________________________________________

___________________________________________

Only networked Zebra label printers are supported. USB-only label printers are not supported.

___________________________________________

The DS9208 (USB version) is not supported because the iPad Lightning port doesn't supply enough power to run the barcode scanner.

___________________________________________

Bluetooth keyboards may be used with the SellTreez Retail iPad app for easy data entry, such as capturing notes or searching for customers by name.

Back to top

_________________________________________________________________________

Download the iPad App

Open the SellTreez Retail app and log in with the same username and password you use to access your Treez portal from a desktop.

Back to top

_________________________________________________________________________

Tip: These instructions are applicable only to the supported LAN Receipt printers (TSP100III futurePRNT [LAN] and mC-Print3).

Step 1: Turn the receipt printer OFF.

Step 2: Push and hold the feed button while turning the printer ON.

Step 3: Wait for the 'Current IP Parameters Status' to print.

Step 4: Record the result shown in the 'IP Address' field.

Step 5: Open the SellTreez Retail app. On the Customer Queue screen, select No Customer to proceed with set-up.

Step 6: Open the side menu by clicking the menu icon in the upper left-hand corner of the screen and select iPad Hardware.

Step 7: Select LAN Auto-Discovery which will attempt to automatically locate the correct printer.

Step 8: Enter the printer's IP Address. Once the printer is displayed, confirm it is the correct model.

Step 9: Press Test Receipt to verify the printer works, and ensure there is a blue checkmark next to the selected printer.

Step 10: Click Save in the upper right-hand corner.

___________________________________________

Bluetooth printers have a range of about 30 ft.

Step 1: Open the Settings app on your iPad and select Bluetooth.
​

Step 2: Locate the printer in the 'OTHER DEVICES' section. Tap the printer to move it to the 'MY DEVICES' section.
​

Step 3: Open the SellTreez Retail app. On the Customer Queue screen, select No Customer to proceed with set-up.

Step 4: Open the side menu by clicking the menu icon in the upper left-hand corner of the screen and select iPad Hardware.

Step 5: In the 'Receipt Printers' section press '+'.

Step 6: Select Bluetooth, and then select the correct printer.

Step 9: Press Test Receipt to verify the printer works, and ensure there is a blue checkmark next to the selected printer.

Step 10: Click Save in the upper right-hand corner.

Back to top

_________________________________________________________________________

ZD 410

Step 1: Turn on the printer and wait for the Network icon on the right-hand side to turn green.

Step 2: Press and hold the 2 buttons on the right-hand side of the printer: Feed and X.

Step 3: Wait for the 'Network Configuration' to print.

Step 4: Record the result shown in the 'IP Address' field. Then, continue to Step 5 below.

LP 2824 Plus

Step 1: Turn on the printer.

Step 2: Press and hold the green button on the top of the printer until it blinks once then release.

Step 3: Wait for the 'Network Configuration' to print.

Step 4: Record the result shown in the 'IP Address' field. Then, continue to Step 5 below.

___________________________________________

Step 5: Open the SellTreez Retail app. On the Customer Queue screen, select No Customer to proceed with set-up.

Step 6: Open the side menu by clicking the menu icon in the upper left-hand corner of the screen and select iPad Hardware.

Step 5: In the 'Label Printers' section press '+'.

Step 6: Select which size labels this printer uses.

Step 7: Enter the printer's IP Address, then click Add.

Step 8: Press Test Label to verify the printer works, and ensure there is a blue checkmark next to the selected printer.

Step 9: Click Save in the upper right-hand corner.

Back to top

_________________________________________________________________________

Tip: It is important to scan all these barcodes in the order below.

Step 1: Scan this barcode to reset the scanner.

Step 2: From top to bottom, scan the Carriage Return/ Line Feed barcodes:

Step 3: Scan this barcode to put your scanner into pairing mode.

___________________________________________

Step 4: Open the Settings app on your iPad and select Bluetooth.
​

Step 5: Locate the scanner in the 'OTHER DEVICES' section. Tap the scanner to move it to the 'MY DEVICES' section.

___________________________________________

NOTE: This procedure is for a 13.3.x device that has been connected to a Bluetooth barcode scanner.

Step 1: Select a text field, such as the 'Search Customers', 'Search Products', or 'Order Notes' field. A toolbar will pop up on the bottom of the screen. If the toolbar does not pop up, scan a barcode into the text field to force the toolbar to appear.

Step 2: Located on a bar in the lower-right corner of the screen, hold down the rightmost downward-facing arrow, quickly releasing it after 1-2 seconds until the on-screen keyboard appears.

Step 3: To hide the keyboard, click on an inactive portion of the screen or select the downward-facing arrow located on the top-right corner of the keyboard.

Back to top

_________________________________________________________________________